Rohan clothing uses the world’s most advanced fabric technologies. These technologies are hidden and will enable you to thrive in the harshest conditions Mother Nature can throw at you – wherever in the world you’re heading. Rohan clothing is protective, versatile, fast drying, tough, light and highly packable. It offers pure function and reliability, pared down and stripped out. And because Rohan clothing doesn’t look overtly technical, you can wear it for the everyday, taking the rough with the smooth.
Our DWR ™ finish is an advanced treatment which dramatically increases the water repellency of our fabrics. On its own, it offers a useful level of shower resistance; used in conjunction with our Barricade™ technology, it reduces the tendency of the face fabric to wet out and maximizes breathability.
This garment has been tested in accordance with recognized international standards for ultraviolet radiation protection – and has been awarded a rating of UPF 40+. The protection offered may be significantly reduced with extended wear or if the garment is stretched or wet. Any associated UV risks will vary according to individual skin type or medical history.
Clever design is more often than not about what to take off rather than what to put on. It’s about giving one feature multiple functions. That’s why many of our garments feature a Packpocket™. This handy addition converts pockets into space-saving storage by compressing the garment into itself. You could use it as a travel pillow when it’s all packed down too.
Losing the odd bit or bob when you’re close to home is rarely an issue, but losing car hire keys, passport, phone or wallet becomes more important than ever in a far off land. That’s why lots of thought goes into safer pockets – deeper, zipped and hidden.
RFID stands for radio frequency identification. These are small chips found in passports, ID cards and credit cards which help with transactions. RFID readers can be used to steal personal information and card details. RFID blocking technology blocks these readers and can be incorporated into wallets, bags and jacket pockets to protect the contents from identity theft.
Taking its inspiration from the composition of reindeer fur, our Thermocore™ fabric is made from polyester filaments – with a hollow core. And it’s this hollow core that’s the secret to Thermocore’s incredible insulating properties. Dry air has a tiny thermal conductivity – 24 times less than water – and our Thermocore™ fabric simply traps more of it than an ordinary, solid fibre. And if it’s good enough for reindeer…
DMC™ is a wicking treatment that rapidly spreads the moisture our bodies create across the surface area of a garment. This can be achieved through the technical construction of the garment or by a performance coating and ensures that the garment dries more quickly, encourages evaporative heat loss and helps you stay cooler and more comfortable for longer.
Insect Shield® technology converts clothing into convenient, comfortable and effective protection against biting insects. Each garment is treated with permethrin – an invisible and odourless ingredient that helps protect against insects such as mosquitoes, ticks, ants, flies, chiggers and midges.
Garments treated with our Anti Odour Silver technology benefit from the natural antimicrobial properties of silver. Tiny traces of silver, distributed evenly throughout the garment, inhibit the growth of bacteria reducing mould and odour. This treatment is permanent – it will never wash or wear out.
Barricade™ is a waterproof, windproof and breathable technology that has been tested and measured to achieve a minimum initial Hydrostatic Head measure of 20,000mm and an initial Moisture Vapour Transmission Rate measure of 20,000 g/m2/24 hrs. With our 2-layer construction method, a water-repellent outer fabric and the PU hydrophilic membrane are bonded together. A loose lining protects the membrane from the inside.
Barricade™ is a waterproof, windproof and breathable technology that has been tested and measured to achieve a minimum initial Hydrostatic Head measure of 20,000mm and an initial Moisture Vapour Transmission Rate measure of 20,000 g/m2/24 hrs. With our 2.5-layer construction method, a water-repellent outer fabric and the PU hydrophilic membrane are bonded together. A partial print is applied to the inside of the fabric to protect the membrane from abrasion.
Barricade™ is a waterproof, windproof and breathable technology that has been tested and measured to achieve a minimum initial Hydrostatic Head measure of 20,000mm and an initial Moisture Vapour Transmission Rate measure of 20,000 g/m2/24 hrs. With our 3-layer construction method, the water repellent face fabric and the waterproof-breathable membrane are bonded together with a lightweight, wicking scrim.
Barricade™ is a waterproof, windproof and breathable technology that has been tested and measured to achieve a minimum initial Hydrostatic Head measure of 20,000mm and an initial Moisture Vapour Transmission Rate measure of 20,000 g/m2/24 hrs. With our Dry liner construction method, the PU hydrophilic membrane is laminated to an inner liner. A loose outer made from a water-repellent synthetic fabric protects the membrane from the outside.
Insuloft™ is an advanced synthetic wadding that offers a better warmth-to-weight ratio than polyester fleece and better performance when wet than conventional down. It’s durable, compressible, lightweight, easy to wash and fast drying – it’s the perfect choice for cold-weather protection.
Our Hydrophobic Down fill is a high quality blend of 80% 650+ Fill Power white goose down blended with 20% feathers. Extremely thermally efficient and highly compressible it’s the perfect, packable choice for cold winter conditions: Our Hydrophobic Treatment dramatically improves water-resistance – and damp weather performance.
Extremely packable with a very high warmth-to-weight ratio, Thindown is an innovative insulation made from natural down which has been made into thin ‘sheets’ bordered with a superfine scrim. This construction eliminates the need for baffles, reducing down migration and creating a more even distribution of insulation without cold spots. Machine washable.
Sustans® is a highly insulating synthetic filling that mimics the look, feel and performance of natural down. Manufactured from a plant-based oil, it’s lightweight, highly compressible and offers a comfortable, soft feel. It’s fully machine washable and extremely quick drying – the perfect choice for cold-weather travel and outdoor use.
Our 2.5-layer Barricade™ with P4Dry™ print keeps jackets waterproof and breathable, while cutting down on weight.
It works by bonding together a water-repellent outer fabric and a breathable membrane. The P4Dry™ print is then applied directly to the inside of the fabric. This wicks moisture away and protects the membrane from abrasion.
The Barricade fabric has a Hydrostatic Head of 20,000mm and a Moisture Vapour Transmission Rate of 20,000g per metre square every 24 hours. These are measures of the amount of water the fabric can withstand and the amount of moisture that can pass through it.
Our 3-layer Barricade™ knit waterproof technology is used to make raincoats that are ultra-waterproof yet breathable. The three-layer design bonds together a water-repellent outer fabric, a breathable membrane and a moisture-wicking lining.
The fabric has a Hydrostatic Head of 20,000mm—this is the amount of water the fabric can withstand before it seeps through. And a Moisture Vapour Transmission rate of 20,000g per metre squared every 24 hours—this is the amount of water vapour that passes through the jacket over time.
Merino Cool is a blend of polyamide, merino wool and lyocell which brings durability, moisture management and softness to clothing.
The fabric is easy to wash, quick drying and is crease-resistant. Its breathable and moisture wicking properties keep you feeling dry while the antimicrobial nature of the fabric controls odour.